THE L58E FOR EVERYONE

Innovative

Being easily accessible to everyone, MaraX provides the perfect match of simplicity and professionalism. Anyone can turn into a real home-barista by always shooting a perfect espresso.

User-friendly

MaraX is designed to enable anyone to extract an espresso as good as the coffee bar using an L58E group.

Silent

MaraX is extremely silent thanks to a patent pending system and provides a water flow projected to extract the best out of different coffee types and roasts, during each extraction phase.

Machine customization

When using MaraX you won’t need to worry about brewing temperature: thanks to the configuration buttons you can choose both the mode of use and the preferred extraction temperature between warm, hot and extra hot, to obtain the perfect drink.

It measures brewing pressure

MaraX’s double pressure gauge allows you to control both the pressure of the steam boiler and the pressure during coffee extraction. You will thus be able to observe the brewing curve from the pre-infusion to the end of the extraction.

It has an easily accessible water tank

The new etched reservoir makes filling and cleaning comfortably easy thanks to its completely opened top. It is equipped with devices that memorize the number of loadings to easily monitor the consumption of the water softening filter.

Each single Lelit espresso machine has been designed and manufactured in Italy sharing the same technology and parts as the professional ones used in cafes. When buying a Lelit machine, you’ll acquire a product that has been planned, designed and manufactured for true espresso lovers.

One shot after the other

MaraX has eliminated the long waiting time in between, that was typical of the E61-types groups. This espresso machine is always ready to brew the next shot.

The new stainless steel boiler AISI 316L

The new stainless steel boiler AISI 316L is another detail aimed at improving the final result: an espresso that keeps its taste and aroma intact through each single bean from the start to the very end.

Extractions as you have never seen before

Each machine part contributes to the making of the perfect espresso from the 58mm portafilter to the coffee slide spout delivers the espresso straight into the cup. Nothing happens by chance. Gradual inclination, spout length and open areas have been carefully calibrated to yield the best performance.

Buses cool touch (anti-brûlures)

Lelit’s new steam ergonomic wands are all Cool Touch to avoid getting burnt. Cleaning has been made simple to prevent scale formation giving the user yet another advantage contributing to the full enjoyment of espresso making.

Power saving

MaraX comes equipped with a sophisticated power saving system that reduces the pressure in the steam boiler when not in use. This means saving a lot of power and eliminating unnecessary waste. The warm-up time once the machine is turned on is a maximum of 24 minutes.

On the MaraX V2, there are 2 operating modes:

1- Xmode Steam : In this mode, the machine works as if it was a dual boiler. The software focuses on the boilers and the heat exchanger, guaranteeing steam availability after the brewing process is concluded. In this scenario, the temperature profile of the brewing process is less consistent but is stabilized during coffee extraction. Overall, the machine has higher steam performances. The HX Boiler works more intensively to balance the thermal fluctuation inside the boiler during the brewing process.

2- Xmode Coffee : In this mode, the machine works as if it was a single boiler with PID control. The software turns off the steam boiler during coffee brewing, on one hand, reducing the risk of overheating (typical problem of HXmachines) and on the other hand, increasing the thermal stability. To recognise the setting the machine is in, the user can simply turn it off and back on; if the led of the power button LED blinks, the Xmode coffee is active. Best scenario of use: specialty coffee (light –roasted coffee beans)

Steam boost :

Every time the lever is lifted and then lowered; the software turns ON the heating element. This happens for two reasons: the boiler heats up the cold water that came in and pressure for milk preparation increases. This means that the user is able to warm up milk without brewing coffee, they just need to lift and lower the group lever in order to have more than 1.2 bar pressure for 120 seconds.

Double NTC system (Negative Temperature Coefficient) :

MaraX has a double temperature sensor system which results in a more reactive machine during warm up and in an excellent thermal stability in the steam and hot water delivery. Furthermore, this works as a double control system allowing each sensor to detect independently any temperature fluctuation, the heating element then works fast to adjust.